Search - Content

CO2-O2-UNIT-BL-CP2

Supplies desired Air-CO2 or N2-O2-CO2 mixture at controlled pressure

Features

  • Centralized gas mixer capable to supply desired gas to multilple equipment (see shematics below in page)
  • One unit supplies up to 1.6 l/min of mixed gas
  • Mixes two or three gas, according to operator's need, with mass flow controllers
  • Can be manually calibrated with any CO2 and O2 meter
  • Can be equipped with CO2 and O2 Okolab Concentration Meter for automatic calibration and closed loop feedback on gas composition
  • It replaces pre-mixed tanks (evaluate your cost savings with the tool below in this page)

CO2 O2 UNIT BL - CP2

  • Operation mode CO2/O2: Adds CO2 and Air to N2
  • Operation mode CO2: Adds CO2 to Air
  • Concentration Range: CO2: 0-10%; O2 0-10%
  • CO2 Accuracy: ±0.1% with CO2 O2 ANALYZER
  • O2 Accuracy: ±0.1% with CO2 O2 ANALYZER
  • CO2 Repeatability: ±0.1%
  • O2 Repeatability: ±0.1%
  • Output Maximum Flow Rate: 1.6 Nl/min
  • Maximum Output Pressure: 2.0 barg
  • Input CO2, Air and N2 Pressure: 4.0 barg
  • Input Gas connectors: 6 mm OD push in fittings
  • Controller Dimensions, mm: 319 x 251 x 117 (Width x Depth x Height)
  • User interface: Touch screen magnetic pad
  • Web Operation Through Smart Box
  • Output gas filter: VOC and HEPA filter upon request
  • Communicates with CO2 O2 ANALYZER via RS232 TTL

CO2 O2 ANALYZER

  • CO2 Sensor: Non Dispersive InfraRed (NDIR) dual wave length detector
  • O2 Sensor: Optical Oxygen Sensor
  • Sensor Calibration via Touch Pad with Span Gas
  • Communicates with CO2 O2 UNIT BL - CP2 with RS232 TTL
  • Certification: CE
CO2-O2-UNIT-CP2_480x320.JPG
Tri-Gas-Mixer
 

Logic_Scheme_CP2.jpg