Search - Content

H101-CRYO-BL

Temperature is directly measured inside a reference Petri-dish and is controlled by circulating water from a cryostatic water bath into the Water Jacket Chamber. The controller reads the temperature in the reference well and updates the set point temperature of the water bath, ensuring a specimen temperature stability of ± 0.1°C.

  • Temperature Range: from 10/15°C BELOW Room temperature (depending on chamber model) to 60°C
  • Temperature Accuracy: ± 0.1°C in sample feedback mode
  • Internal resolution: 0.01°C
  • Set point value from room temperature to 60°C
  • Can operate in sample or chamber feedback mode
  • Compatible with Okolab Objective Heater
  • Compatible with manual and digital gas controllers
  • Compatible with Active Humidity Controller
 

H101-BASIC-BL

Temperature is directly measured inside a reference Petri-dish and is controlled by circulating water from a water bath into the Water Jacket Chamber. The controller reads the temperature in the reference well and updates the set point temperature of the water bath, ensuring a specimen temperature stability of ± 0.1°C.

  • Temperature Range: from 3°C above ambient to 60°C
  • Temperature Accuracy: ± 0.1°C in sample feedback mode
  • Internal resolution: 0.01°C
  • Set point value from room temperature to 60°C
  • Can operate in sample or chamber feedback mode
  • Compatible with Okolab Objective Heater
  • Compatible with manual and digital gas controllers
  • Compatible with Active Humidity Controller