Search - Content

H301-OLYMPUS-IX3-SVR

Stage compatibility: screws onto Olympus IX3-SVR Stage
 
 Magnetic inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
  • 6-12-24-48-96 MW Plates (without addition of inserts)
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri, Slides and MW in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in the chamber riser

 

H201-OLYMPUS-IX3-SVR_480x320.jpg
  

Available Inserts

6MW 6 well plates 6-MW.JPG
12MW 12 well plates 12-MW.JPG
24MW 24 well plates 24MW.JPG
24MW-NUNC 24-well NUNC/GREINER plates 24MW-NUNC.JPG
48MW 48-well plates 48MW.JPG
96MW 96-well plates. Includes MW-OIL 96MW.JPG
MW-OIL Open frame to image multi well plates with oil immersion objectives MW-OIL.JPG
1x35-M #1 35mm Petri-dish 1x35-M.JPG
1xGS-M #1 1x3in. chamberslide 1xGS-M.JPG
1xLABTEK-M #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M.JPG
1xLABTEK-II-M #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-M.JPG
1x60-M #1 60mm Petri-dish 1x60-M.JPG
1xT25-M #1 Nunc and Greiner T25 flask 1xT25-M.JPG
2x35-M #2 35mm Petri-dish 2x35-M.JPG
2xGS-M #2 1x3in. chamberslides 2xGS-M.JPG
2xLABTEK-M #2 Lab-Tek 1x2 in. chambered cover glass 2xLABTEK-M.JPG
2xLABTEK-II-M #2 Lab-Tek II 1x2 in. chambered cover glass 2xLABTEK-II-M.JPG
2x60-M #2 60mm Petri-dish 2x60-M.JPG
4x35-M #4 35mm Petri-dish 4x35-M.JPG
GS35-M #1 1x3in. chamberslide and #2 35mm Petri-dish GS35-M.JPG
LABTEK-35-M #1 Lab-Tek 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-35-M.JPG
LABTEK-II-35-M #1 Lab-Tek II 1x2 in. chambered cover glass and #2 35mm Petri-dish LABTEK-II-35-M.JPG
LABTEK-60-M #1 Lab-Tek 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-60-M.JPG
LABTEK-II-60-M #1 Lab-Tek II 1x2 in. chambered cover glass and #1 60mm Petri-dish LABTEK-II-60-M.JPG
GS60-M #1 1x3in. chamberslide and #1 60mm Petri-dish GS60-M.JPG
6035-M #1 60mm Petri-dish and #1 35mm Petri-dish 6035-M.JPG

Available LIDs

H301-KOEHLER LID Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID.JPG
H301-INJECTION-LID Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen Note: compatible only with specimen holder 1x35 H301-INJECTION-LID.JPG
H301-LASER-INTERLOCK-LID Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted Note: compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID.JPG
H301-OLYMPUS-IX3-SVR-[SLIDING LID]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Sliding Lid
H301-OLYMPUS-IX3-SVR-[KOEHLER LID]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Koehler Lid
H301-K-FRAME-LID_600x600.jpg
H301-OLYMPUS-IX3-SVR - Available Lids
H301-OLYMPUS-IX3-SVR-[SLIDING LID]-[DIMENSIONS].jpg
H201-OLYMPUS-IX3-SVR with Sliding Lid - Dimensions  TIPA plate adapter not reported
H301-OLYMPUS-IX3-SVR-[KOEHLER LID]-[DIMENSIONS]_600x600.jpg
H301-OLYMPUS-IX3-SVR with Koehler Lid - Dimensions  TIPA plate adapter not reported
H301-OLYMPUS-IX3-SVR-[6MW]_600x600.jpg
H301-OLYMPUS-IX3-SVR - 6 MW Plate - requires chamber riser

H201-K-FRAME-ADAPTERS_600x600.JPG
H301-OLYMPUS-IX3-SVR - Magnetic inserts
H201-K-FRAME-ADAPTERS-2_600x600.JPG
H201-OLYMPUS-IX3-SVR - Magnetic insterts
H201-K-FRAME-MAGNETIC-LOCKS.jpg
H301-OLYMPUS-IX3-SVR - Magnetic sample locks
 
 

H301-OLYMPUS-IX-SUSP

Stage compatibility: screws onto IX-SUSP, GX-SVR, GX-SFR, BX3-SSU, IX2-SFR, IX2-SVL-2 - comes with Sliding Lid
 
Magnetic inserts allow to use:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
Features:
  • Sliding lid for easy pipetting
  • Optional lids available for Kohler Illumination, Laser Safety, Injection during imaging
  • Flexible chamber height thanks to the removable chamber riser and the optional Koheler Lid
  • Magnets allow easy interchange of chamber inserts
  • Magnetic locks hold Petri and Slides in correct position inside the chamber
  • Perfusion holes: 8 channels for 2.5mm O.D. tubings are available in chamber riser.

 

H301-OLYMPUS-IX-SUSP_480x320.JPG
  

Available Inserts

1x35-M single #1 35mm Petri-dish 1x35-M-single.JPG
1xGS-M-single #1 1x3in. chamberslide 1xGS-M-single.JPG
1xLABTEK-M-single #1 Lab-Tek 1x2 in. chambered cover glass 1xLABTEK-M-single.JPG
1xLABTEK-II-M-single #1 Lab-Tek II 1x2 in. chambered cover glass 1xLABTEK-II-single.JPG
1x60-M-single #1 60mm Petri-dish 1x60-M-single.JPG

Available LIDs

H301-KOEHLER LID-2 Glass lid that reduces the height of the chamber and allows to work under Koehler illumination. Minimum condenser working distance (without chamber riser): 22mm H301-KOEHLER-LID-2.JPG
H301-INJECTION-LID-2 Glass lid with two small openings (sealed with flexible plastic) to allow injection or permanent access to the specimen. Compatible only with specimen holder 1x35 H301-INJECTION-LID-2.JPG
H301-LASER-INTERLOCK-LID-2 Glass lid with a safety switch that connects to the laser box. The switch turns off the laser, when the lid is lifted. Compatible only with specimen holder 1x35 H301-LASER-INTERLOCK-LID-2.JPG
H301-OLYMPUS-IX-SUSP_600x600.jpg
H301-OLYMPUS-IX-SUSP with Sliding Lid
H301-OLYMPUSwithKoehlerLid_600x600.jpg
H301-OLYMPUS-IX-SUSP with Koehler Lid
H301-NIKON-TI-SR-Lids_600x600.jpg
H301-OLYMPUS-IX-SUSP - Available Lids

H201-NIKON-TI-SR-DIMENSIONS.jpg
H301-OLYMPUS-IX-SUSP- Dimensions with Sliding Lid
H201-NIKON-TI-SR-KOEHLER-LID-DIMENSIONS.jpg
H301-OLYMPUS-IX-SUSP- Dimensions with Koehler Lid
H301-NIKON-TI-SR-Adapters_600x600.jpg
H301-OLYMPUS-IX-SUSP - Magnetic Inserts
 
 

H301-PRIOR-NZ500

Stage compatibility: fits  on Prior NZ500 piezo Z-stages
 
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
  • 6-12-24-48-96 MW plates (without addition of inserts)
Features:
  • Uniformly heated by means of embedded electric resistances and is covered with a temperature controlled conductive glass lid
  • Magnets allow easy interchange chamber insert
  • Magnetic locks hold Petri, Slides in correct position inside the chamber
  • Perfusion holes: channels for 2.5 mm O.D. tubings are available in chamber riser
  • Removable riser to fit standard multiwell plates or to perform perfusion

no_image2.gif

 
 

H301-UP

Stage compatibility: fits on Upright Microscopes
  • Part number of the objectives in use must be specified in purchase order
  • XY stage model and serial number must be specified in purchase order
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. / 1x2 in. chambered slides
Features:
  • Suitable for dipping lens
  • Manageable chamber thanks to the opening of the lid to introduce the objective
  • Magnets allow easy interchange chamber insert
  • Magnetic locks hold Petri, Slides in correct position inside the chamber
  • Perfusion holes: 12 channels for 2.0 mm O.D. tubings are available
  • To control the humidity into the chamber humidity module is recommended: HM-ACTIVE

 

H301-UP_480x320.jpg

Available Inserts

UP-1x35-M #1 35mm Petri-dish UP-1x35-M.JPG
UP-1xGS-M #1 1x3 in. chamber slide UP-1xGS-M.JPG
UP-1xLABTEK-M #1 Lab-Tek 1x2 in. chambered cover glass UP-1xLABTEK-M.JPG
UP-1xLABTEK-II-M #1 Lab-Tek II 1x2 in. chambered cover glass UP-1xLABTEK-II-M.JPG
UP-1x60-M #1 60mm Petri-dish UP-1x60-M.JPG
H301-UP-[Exploded-OPEN]_600x600.jpg
H301-UP - Components
H301-UP-[ADAPTERS-1]_600x600.jpg
H301-UP - Available inserts 
H301-UP-[LID-STANDARD]-[DIMENSIONS]_600x600.jpg
H301-UP - Dimensions
 

H301-PRIOR-NZ100-H117

Stage compatibility: fits on Prior NZ100/200 in Prior H117
 
The chamber can fit:
  • 35/60 mm Petri
  • 1x3 in. chambered slides
Features:
  • The chamber hosts #1 35mm petri or #1 chamber slide
  • Flexible chamber height thanks to the removable chamber riser required to perform perfusion
  • Perfusion holes: 12 channels for 2.5mm O.D. tubings are available in chamber riser

 

H301-PRIOR-NZ100-H117_480x320.JPG

Available Drawings

H301-PRIOR-NZ100-H117_600x600 (2).JPG
H301-PRIOR-NZ100-H117 - 3D View
H301-PRIOR-NZ100-H117_600x600.jpg
H301-PRIOR-NZ100-H117 - Components
H301-PRIOR-NZ100-H117-[DIMENSIONS]_600x600.jpg
H301-PRIOR-NZ100-H117 - Dimensions